1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Deflection p/s belt? Converting manual locks and windows to power 921 reverse bulb Bed extender install Head Gasket leak diagnoses by visual? What's wrong with my compressor - pulleys don't line up

Fitting 35's on 3" suspension lift

Discussion in '1st Gen. Tacomas (1995-2004)' started by ponethousand, Dec 20, 2013.

Page 31 of 31
  1. Apr 24, 2024 at 8:14 AM
    #601
    drr

    #601
    drr Primary Prognosticator

    Joined:
    Oct 17, 2013
    Member:
    #114681
    Messages:
    2,718
    Gender:
    Male
    First Name:
    Dan
    Seattle-ish
    Vehicle:
    02 4WD Tacoma
    Correct, took those pics while checking full bump clearance after installing the Solo arms. My stock LCAs were cammed out all the way forward, and the Solo’s are set at a neutral position, so I think the tire is actually in about the same spot.
    The next thing to interfere with the tire is in the front, on the inner fender and core support, bumper, etc. So I don’t really want to move the tire too much further forward. And I have about 4 degrees of caster currently.
     
    drr, Apr 24, 2024
    #601
    Laxtoy[QUOTED] likes this.
Page 31 of 31

Products Discussed in

Kydex Plastic Sheet Black 24" X 48" X .080"
$57.13
Wilwood Engineering 260-12627 Adjacent Proportioning Valve Knob Style (M10 x 1.0 BF inlet)
$55.29
To Top