ModCo Blems 17x8.5 +00 & 17x9 -25

Hey everyone
Over the last 5 months of shipping we've come across a handful for wheels that didn't make the cut. The blemishes are typically pretty minor but not adequate for shipping as first line product.

I have the following available and they're $150 each plus shipping. Shipping is typically $20-$30

17x8.5 6x5.5 +00 M71 and M72
17x9 6x5.5 -25 M71 and M72
These will fit GEN1 Tacoma but you cannot use center caps.

 

Typical defects

 

Are you based out of Reno?

 

Yep, close to Double R

 

1. 

I finally have to time to mount these to my gx470. Overall, I am loving the six spoke look of these. These are the blem set. I couldn’t find any dust or casting flaws. Some powder coat missing in the lug pockets is all I really notice.

 

Bump. Still a few sets left.

 

Why are these listed as not fitting first gen Tacomas? Also what is the backspace for these two wheels?

 

Cap opening is too small. I've seen people machine open the cap bore and run them without caps.

17x8.5 +00 = 4.75" bs
17x9 -25 = 4" bs

 

Not a bad way to make you forget about those minor blemishes. OMF Sim-U-Lock conversion. If anyone is interested in having OMF do this, it only costs $20 per to ship to them. You would pay them for the conversion.

 

So sweet!

 

Hey there! I’m super interested In a set of the 17x9 if you still have some?

 

Yes, still available.

BUMP for anyone else looking. I still have quite a few blems on hand. Most are pretty small blemishes.

 

Had to really look for some of the "blemishes". More than likely I will be the only one to ever know, to someone just walking by and looking, they would likely never notice.

 

What size?

 

stock size tires 265/65 r17 on the 0-offset rims.

 

As we were inspecting some machined 17x9 -25 M71’s we found some minor blemishes. Only 4 of these available.

 

Bump currently available (M71 -6 Spoke / M72 = 15 Spoke)
13) M71 17x8.5 +00 Black
11) M72 17x8.5 +00 Black
9) M71 17x9 -25 Black
4) M71 17x9 -25 Machined
15) M72 17x9 -25 Matte Black
7) M71 17x8.5 +00 Machined

 

What bolt pattern is the 5 lug?

 

@backcountryj 5x150 17x8.5 +06