1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Blower not working

Discussion in '1st Gen. Tacomas (1995-2004)' started by jdfnnl, May 2, 2024.

  1. May 2, 2024 at 10:15 PM
    #1
    jdfnnl

    jdfnnl [OP] New Member

    Joined:
    May 1, 2024
    Member:
    #448984
    Messages:
    1
    '95 Tacoma with a cab fan / dash gauge cluster not operating. Turn signals and reverse lights also don't work. The buzzer no longer turns off when ignition switched to ACC. I went through both fuse locations and nothing seems to be blown. Is there a known problem that could be causing this set of inoperable components?
     
  2. May 2, 2024 at 10:30 PM
    #2
    Robnik

    Robnik Disciplined Maniac

    Joined:
    Aug 10, 2012
    Member:
    #84461
    Messages:
    6,686
    First Name:
    Rob
    Greenacres, Florida
    Vehicle:
    2012 Base Reg Cab 2.7L 2TR-FE A340E
    Seems to be blown, doesn't mean it isn't. Replace, they're cheap. If nothing, then you have something else going on.
     
  3. May 2, 2024 at 10:37 PM
    #3
    Dm93

    Dm93 Test Don't Guess

    Joined:
    Mar 3, 2015
    Member:
    #150066
    Messages:
    13,821
    Gender:
    Male
    Texas
    Vehicle:
    2014 DC OR 6spd 4x4
    Predator tube steps, Ranch Hand grill guard, Magnaflow CatBack exhaust, Toyota tool box & bed mat, 2LO Module by @Up2NoGood, Rearview Compass/Temp Mirror, Tune by @JustDSM.
    See if you have power on Both sides of the GAUGE Fuse (10A) in the interior fuse box with the key in the Run position.
     
  4. May 3, 2024 at 8:41 AM
    #4
    O'Silver_Taco

    O'Silver_Taco Well-Known Member

    Joined:
    Aug 26, 2021
    Member:
    #375390
    Messages:
    4,251
    Gender:
    Male
    First Name:
    MD
    Vehicle:
    98 Dlx Sr5 ext AT Rwd
    3rz to 2Rz bebuilt block and new heads
    Ignition switch going bad would do this......

    buzzer not going off kinda points there tooo...

    the am1 branch out of that switch powers all that stuff you say is dead...

    if that branch is good.....you should be able to get 12v at that 10amp gauge fuse as he said above, with the key on acc or run..

    if thats good ......then trace back to the actual am1 40a fuse under the hood..
     
    ControlCar likes this.

Products Discussed in

To Top