What Have You Done To Your 3rd Gen Today?

Subtle mod, but swapped out the OEM silver lug nuts for some black ones off the ole Amazon. The more I look at this picture, the more I realize I need bigger tires 255/85/16s coming soon!

 

https://www.tacomaworld.com/threads...ckford-fosgate-speakers.825758/#post-29608569

 

15.8 mpg
265/75 16 ko2,
1.5-2” lift.
Driving mostly suburban streets. (No mall crawling)

 

What pizza cutters are you looking at? I’ve been thinking I will get some in the future. I came across this though. https://www.americastire.com/buy-tires/falken-wildpeak-a-t4w/p/152124

 

Washed and shined up with TW product.

 

Those tires look great!

 

yeah I was thinking these as well! I drive highways a lot and don’t really want any MT tires

 

That bumper looks so clean! I've been thinking about getting this one.

 

Some quality of life improvements today:

Removed the speaker behind the cluster that is responsible for the blinker click and allllll the interior beeps, i.e. turning off the engine with the door open and seatbelts etc. I drive my truck around neighborhoods all day long from jobsite to jobsite and I frickin hate the seatbelt beep lol. (And I know about tech stream, carista, etc, but I chose this route for my personal preference)

Also installed some special seat jackers made by @mrproduxn and they fit and work great, he even supplied longer bolts too. (I think he only made one last run of these so idk if he’ll make more, but he might have a couple sets left, just FYI)

 

100%, 50/50

 

Out with the old and in with the new. 6112/5160s and Icon RXT installed this morning.
I’m going to drive around for a bit more and double-check torque before I do any post-lift measurements.
My test drive and quick trip to the gas station was nice. Much smoother than the OE Pro suspension.

 

a few local tacoma's have them. i'm not impressed with their performance at all. i really question if the illumination area meets DOT requirements...

 

Looks good... they just had a deal on those BOGO and I got 2.... Let us know how long it lasts...

 

Got a new bottle jack to carry in the truck. Pretty much the same min and max height as the stock screw jack but with a slight modification to a hi lift base plate I get a few extra inches of height just in case.
Only reason I got it is because I got a flat a while ago and realized after using the OEM jack that hydraulic lifting is much easier.

 

Exactly what I did...BOGO deal. I'm gonna do the wash and apply wet methods to kids vehicles. See how that methods works.

 

I know I'm kind of late to the party but finally got a TRD Pro grill. Got OEM from a local dealer.

 

Added some baja goodies to replace the diode dynamics kit.

 

These are good for the price and have that molded neoprene look. The only downside is they are thinner than Wet Okole I've had in the past. Still, for the price, it's the best seat cover available for those not wanting to spend a lot.

 

Just stuffed some 285/75/r16s onto my stock suspension Tacoma .

I have +0 offset wheels for anyone that wants to know, and I did trim the smallest amounts off of the cab mount, but not enough to bust out the welder. . No rubbing at all.

 

Looks good but pretty tight fit. Have you tried it off-road at all? I bet you will get some rubbing when it flexes a bit.