What Have You Done To Your 3rd Gen Today?

These are good for the price and have that molded neoprene look. The only downside is they are thinner than Wet Okole I've had in the past. Still, for the price, it's the best seat cover available for those not wanting to spend a lot.

 

Just stuffed some 285/75/r16s onto my stock suspension Tacoma .

I have +0 offset wheels for anyone that wants to know, and I did trim the smallest amounts off of the cab mount, but not enough to bust out the welder. . No rubbing at all.

 

Looks good but pretty tight fit. Have you tried it off-road at all? I bet you will get some rubbing when it flexes a bit.

 

How’s that light bar connect to the bottom?

 

Discovered that Toyota farmed out its door manufacturing to a company called "Mason". Also discovered my truck id worth 1000 perfect diamonds.

 

Custom Maisto and a custom Hot Wheel for my Taco.

Both were done in actual Inferno Orange Clearcoat Metallic.

 

Had to install a new battery today, the original one died at 114000 miles, I also decided it would be a good time to change spark plugs, the original ones looked decent, but were due

 

Anyone recently buy and install a MX4?
I believed I followed the paper instructions to a T, but when comparing it to a bunch of YouTube install videos, I noticed a couple of things:

1. My cover didn’t require me to lower the existing railing
2. Slam rails, or whatever you call it doesn’t connect with the rail adapter-if you adjust it, it makes the overall width too wide
3. I don’t have as much or the same hardware as any of the videos

 

That’s one way to do it. I just put tape over it.

 

Finally decided to get the OTT tune today and it definitely makes driving a lot more enjoyable. I also installed some seat covers to spruce up the interior a bit and I think they came out nice.

 

First opportunity for a proper driveway wash since hunting season. Also drilled out the bed drains to ½” so they would clear faster.
Lots of tree poop in the BC Interior, so bigger holes are better.

 

not too many metal ones that the Technology-Package works with

 

is that base made for that jack or universal?

 

I made brackets for it. They have been holding a diode dynamics stage series bar for 2 years now. Had to modify it a bit further to work with the s8.

 

FYI the rear covers fit extremely well and are super easy to install.

 

I’ve installed the whole set once, and 2 additional covers (hail destroyed one, and the replacement had an issue with the hinge and BAK replaced that for me). No issues at all. Most recent was just a couple months ago.
Your install comments don’t sound right. Did you get the Tacoma kit? It is a very different install and has extra hardware than other trucks. If you don’t lower the stock rails the tonneau cover rails won’t fit. There should have been an extra set of supplemental instructions just for the Tacoma.

 

It’s a hi-lift base that he modified, re-read the post.

 

The jack fits inside the base no problem, I just had to make a notch to access the release valve

 

Are you saying that he can read?

 

Tux likes pix