1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Exhaust spring bolt rattle

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Bowhunter74, May 14, 2024.

  1. May 14, 2024 at 2:27 PM
    #1
    Bowhunter74

    Bowhunter74 [OP] Well-Known Member

    Joined:
    Aug 4, 2021
    Member:
    #373209
    Messages:
    58
    Gender:
    Male
    Just replaced everything from the spring bolts (including the gasket) down but having an issue at the connection. Because the welded nuts were corroded on the spring bolts I ground them down and used new nuts to lock in. I’ve tried several levels of tightening the new bolts but the rattle only gets worse.

    is my best/only option to cut the ends off and install a small flex pipe with clamps?
     

Products Discussed in

To Top