1st Gen RCD 5100’s 880’s - 1” Taco Lean SMH

This is the 5th various Yota I’ve lifted, and I thought I avoided the Taco Lean by going with the RCD 5100’s and OEM 880’s assembled by Wheeler/ TG.

I’ll call Wheelers tomorrow for some ideas.

But I’m sitting with exactly 1” lean front and rear to the drivers side. Needless to say I’m not impressed.

Truck sat perfectly level on its clapped out original suspension.

Rear has overloads removed and Icon Add-A-Leafs.

I measured, and it looks like the grooves are cut different on the front coil overs, appears to be about 1/8 difference left to right.

I’m debating swapping the fronts left to right, and if that doesn’t work move the driver side to middle setting. 1” seems insane, also, my fuel tank is on empty

 

They may have assembled them as left and right. You'll have to check with them. Whichever side has a taller clip height should go on the driver's side if they're different

 

$55 Shankly Spring Compressor Tool - Heavy Duty Build, Ultra-Rugged Coil Spring Compressor Tool or Strut Spring Compressor Strong and Durable ATV Spring Compressor Tool

https://www.amazon.com/Shankly-Spri...p_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM


Take the shocks apart and verify that they are on the same clip settings, I am guessing the bottom clip since you have aftermarket coils with them.