Best spacers for tire rubbing

Have new tires on my Tacoma and have been dealing with some rubbing. Already trimmed around the wheel well and used a heat gun to mold the plastic but still dealing with it. Anyone know the best spacers to help eliminate rubbing.

 

What size tires did you buy?

 

size tires plus some info? Lifted, factory wheel, UCA/LCA, alignment specs etc?

 

34s with a 2.5 in lift on my trd sport

 

Only really rubs when turning

 

Hitting the cab mount?

 

Spacers can help or hurt depending on the wheel backspacing. We need more info.

 

Hitting the cab mount when turning, Tacoma TRD Pro 16x7 +13mm, ≈4.51 I think

 

I’m no expert but 34 in tire is a lot to fit in wheel well regardless of lift or spacing..with alignment to push tire forward and UCA you might get further away from the cab mount but I’m sure lots will agree the solution is to trim body mount or get smaller tire.. there’s like bazillion threads/users on here and the interwebs to give some input on a cab or body mount chop for a Toyota

 

Sounds good, preciate you

 

https://www.motortrend.com/how-to/tacoma-cab-mount-chop/

 

I run 35s on mine. BMC, pinch weld beatings, and fender trimming. Along with some creative alignments with SPC uppers was my solution. I still get rubs at full lock but it's been a journey.

 

Spacers will only make it worse. Get the sawzall out and hammer.