Circuit Opening Relay issues?

Me either. But I'm bad to start looking at step 17. When I could have found the issue at step 3.

10A EFI #2 fuse would be a check. It tells me the EFI relay is working, and that relay supplies power to a whole host of different "make it run" things.

Still like to know if the tach is working while cranking.

 

Well the CEL is on so we know the PCM is probably online.

 

Yeah. We don’t have fuel or ignition one.
And we won’t with out a crank signal. Which is why I ask about the Tach.

 

Update: Tried Cycling the key and the engine just abour starts but then stutters out.
The fuses I have checked are not blown.
I have used an advanced device and there are no codes.

 

The tachometer does not do anything while trying to start.

 

Did you check the fuses I listed above?

Is your security light still flashing with the key in?

Will your scan tool read data?
If so see what the RPM is while cranking.