Used King shocks

I have a set of 1st Gen Tacoma King front shock with 650 pound springs. Also included is a set of 600 pound springs.

The good: They have about 15,000 miles on a rebuild from King.
No leaks

The Bad: You will need to replace the misalignment spacers
I sprayed some degreaser on them and it took some of the anodizing off. Nothing that effects the function, and King didn't mention any issues.

I am asking $650.00 OBO plus shipping.

 

Location?

 

Sorry, Arizona

 

Misalignments should work with a good application of anti-seize. Worst comes to worst, they're like $10 a piece shipped from King or you can take the dimensions and buy from Dirt King. Just email them.

https://dirtking.com/products/1-5-overall-mounting-width-shock-spacer

 

for stock height or 3in lift ?

 

I had them set at 2.5 inches of lift.

 

Those are for race shocks with a 0.5" bolt and 1.5 mount width.

The OP or buyer will need specific spacers for Toyota's.

I have bearing and spacer kits available.

https://www.303shockservices.com/product-page/2-5-coilover-lower-mount-replacement-bearing-kit

 

I think DK offers different sizes if you send them the dimensions - that’s what I was trying to say.

 

I think he’s asking if they’re normal height or extended travel/need aftermarket upper control arms