N2 design remote start problem

Ive just bought a n2 design remote start for my tacoma 2018 off road manual without phone apps, hkey model, i have the key with the unlock/lock and panic button, everything was good while i installed but at the tpms section i dont have the same wire as the video or the manual installation, im suppose to have green or pink/light pink wire but i only have 3 wire in that 36 pin connector, 2 pink and one purple and they are not in the same spot of the manual, its suppose to be the 4th spot on left portion of the connector im cutting but my wire are in the top(pink), the sixth( purple) and the bottom 9th(pink) , i wasnt sure so ive stop there and remove it, is it possible i dont have that tpms option? but i clearly see my pressure on my dash, anyone else got that problem?

 

Reach out to N2, I believe they are pretty responsive. Without seeing the paper install instructions that you should have it's going to be hard for anyone here to diagnose. I bought the same (hkey manual transmission) kit for my 2020 and I seem to remember there being two routes to go with the TPMS tap depending on year because of the different wires. If you're not seeing that on your printed instructions then I would call N2 to have them walk you through the process.