Too much lift on RXT option 1

Called icon and they asked for some pics. They said somethings not right ans will probbaly be sending a new pack.

 

Icon is sending me new leaf packs to try...

 

New springs installed. Same thing. 3 inches over stock with 300lb in bed.

 

I removed the very bottom leaf and lost an inch of lift. Woohoo

 

Pic?

 

I had mine sitting high once. Realized I torqued the bolts when the truck was in the air. Loosened the hanger bolts when the truck was on the ground and it dropped about an inch. Retorqued while on the ground and no problems since.

 

Currently on Deaver u402 but I've been considering moving to the Icon pack. Can anyone confirm if they are side specific to address Taco lean from the battery and fuel tank on the driver side?

 

Mine are same side to side, even though rear is too high its the same on both sides.

 

Icon says they're not side specific. Op... where are you measuring from to get 3" of Lift? According to the RXT height chart you can't get 3" even at option 3. My hub to fender front is 22" and 24" rear with RXT option 2. After a year the rear has settled to around 23 3/4".... sits pretty much 2" over stock front and back.

 

Measuring from top of axle tube to frame directly above. Stock is 8 inches, im at 11+. I have fiberglass so hub measurements are useless to me.

 

What is your reasoning for moving away from the u402?

 

My axle to frame is about 10.5" ... rxt leaf's at option 2 which gave me about 2" over stock height (measurend with the weight of the canopy and 200 lbs of sandbags.)
Do the Hammer Hangers give additional lift?

 

Ive been told by the man who makes them that they do not.

 

She's up there!!! Installing my pack next week.