Wheel Bearings & Hubs Press Service *** OE NSK ***

@Taco Latte
@mrlee
@danl
@TacoTuesday1
@santosm028
@KBraden79
Shipped

 

@2loose
@Josh_B
Shipped

 

Hi, I know instructions and parts are listed on the first post, but I have a questions about parts I need to buy separately. My dealer quoted these parts to replace the wheel bearing:
- 43502-60201
-

$172 43570-04011 Axle Bearing Assembly, Front

43570-04011
- 90312-96001
- 90316-A0001
- 90301-A0005

No mention of 90304-A0001 which is listed to buy with this kit?

I have a 2012 4X4 4.0L DCLB.

05Taco4X4, I'll be shooting a PM very shortly

 

90304-A0001 is on the end of the CV, mates with the knuckle seal listed.

 

Thanks!

 

@CookieMonster
Shipped

 

@Sokkie9
@Asjboarder
Shipped

 

@Imageoguy
Shipped

 

@AKduckTaco
Shipped

 

Just wanted to thank @05Taco4x4 for this service! Excellent replacements!

 

@REGUL8R
Shipped

 

@plumbtaco
@mobileholmes
Shipped

 

@tacomanut50
@rocksniper
Shipped

 

Received and installed! After 240K km (150K miles) driver's side bearing was really bad. I do a lot of milage at a rather fast pace and fully loaded, on forestry roads, I'm surprised the bearings lasted that long.

One of my knuckle seals was completely pulverized. The other seals didn't have much rubber, if any, left on em. The best way to install seals for me was to remove the two lower knuckle bolts and the stabilizer bar joint, flip the knuckle so the inside faces outside. The knuckle seal was easy to install using a small piece of 2X4 to hammer it in. It took me a while to figure how to install the axel seal, ended up using the old knuckle one with a small piece of 2X4 to push the seal onto the axel the same way they mate together once assembled. I painted and reused my very rusty backplate, and took the occasion to change a bad caliper, brake pads and rotors. Went on to replace back drum brakes the next day. Feels like a new truck Looking forward to another 240k km before next wheel bearing overhaul

Thanks 05Taco4x4!

 

@Star Dust
@elykTacos
Shipped

 

Pm’d

 

Installed.
Been sitting on the work bench for awhile.
Rebuilt the front suspension and threw them on.
Great product.

 

@lipripr
@DubbleCabLongbed
Shipped

 

@Malandesco
Shipped

 

@spals
Shipped