1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Yakima Track System

Discussion in 'Tonneau Covers, Caps and Shells' started by JackieTrucks, Jun 11, 2024.

  1. Jun 11, 2024 at 4:04 PM
    #1
    JackieTrucks

    JackieTrucks [OP] Member

    Joined:
    Feb 20, 2024
    Member:
    #444256
    Messages:
    11
    Gender:
    Male
    Vermont
    Vehicle:
    2017 White Tacoma TRD Off-Road
    Minor light upgrades, OTT Tune, Magnaflow Exhaust
    IMG_6834.jpg IMG_6833.jpg

    First off, thank you for your help.

    I was recently given a Yakima rack system from a shop where I recently had some work done. Big thanks to the guys at The Overland Shop in Essex Vermont. Check them out if you’re nearby. Does anyone have any other track systems they run for these kinds of racks? I’m putting it on my cap and don’t want to have to spend $150 on the tracks if I don’t have to. I included the pictures of the connecting points are. I’m not sure if it’s different depending on the model.

    Thanks
     
    Last edited: Jun 12, 2024
  2. Jun 12, 2024 at 4:02 PM
    #2
    Go Fish

    Go Fish Well-Known Member

    Joined:
    Jun 27, 2016
    Member:
    #190700
    Messages:
    164
    Gender:
    Male
    Vehicle:
    2022 SR5 4x4 DCLB
    The Thule and Yakima tracks they put on canopies are both the same dimensions. It looks to me like your mounts are made for that type of track.
     
  3. Jun 13, 2024 at 12:48 PM
    #3
    MM_Trkr2020

    MM_Trkr2020 Paddler

    Joined:
    May 9, 2020
    Member:
    #327409
    Messages:
    62
    Gender:
    Male
    First Name:
    Michael
    GA
    Vehicle:
    2020 SR5 DCSB 4x4
    ARE Shell with Yakima Racks
    The rack tower in the picture has a landing pad with the square nuts that fit inside the track. If all of the racks have the same hardware with the bolts and nuts that should be all be good to go. I recommend looking on eTrailer for the Yakima tracks needed to mount these racks to your shell. They are available in different lengths (54", 60", etc.). The prices I've seen start at $150 and go up.
     

Products Discussed in

To Top