Which amps?

Thank you for the help. I am trying to use a smaller size amp so that I can place it behind the dash. While I am purely an amateur stereo person I don't want to make a newbie mistake. I will be keeping the stock HU and be using Kicker KSS690 and KSC6704 speakers, thank you again for your help and time.

Clarion XC2410 300 Watt 4-Channel Class-D Marine Amplifie.

$200 Clarion XC2410 300 Watt 4-Channel Class-D Marine Amplifier

https://www.amazon.com/Clarion-XC2410-4-Channel-Class-D-Amplifier/dp/B0BWSL92DK

NVX VADM4.

$200 NVX VADM4v2 4-Channel Class D Amplifier 1000W Peak, 500W RMS, 2/4-ohm Stable, High/Low Pass X-Over, for Car/Truck/Marine/UTV/Motorcycle (VADM4 Version 2)

https://www.amazon.com/NVX-VADM4-40...keywords=nvx+vadm4&qid=1717691544&sr=8-1&th=1

M75-4 75.

Sound Ordnance M75-4 75W x 4 Car Amplifier

https://www.amazon.com/Sound-Ordnan...665&sprefix=sound+ordanance+amp,aps,96&sr=8-6

 

I would spend the extra $25-30 on the kicker key. Adds a lot of features and is tried and true.

the clarion marine stuff is ok, but they know you’ll be on a boat so they can get away with a lot because you won’t hear it.

sound ordinance isn’t anything I’d put in my truck, personally.

I’ve never used NVX stuff

 

@destin_meeks Thank you I will look into the Kicker.

 

Hello All, 2019 SR stock HU, I will be installing Kicker KSS690 speakers in the front ( most likely using the Kicker Key amp ). I amp thinking of running a new wire from the crossover to the dash tweeter. I would like to use the existing wire for the door speaker to simplify the install. My question is how do I handle the junction at the OEM tweeter of the OEM wiring ? or is it easier to just run new wires from crossover to door speaker ? Thank you for any help.

 

Post 20 of this thread. Then a drawing on the next page

 

@destin_meeks thank you for the help and so quickly

 

@destin_meeks Thank you for your help. I ordered the Kicker Key.