Access cab baby seat

I have converted my back seat space into a dog friendly space. I can't remember if there were the attachment point stuff for a baby seat. The two low ones and one high one. I saved everything from the change over but it's covered in carpet now and before I start pulling it apart, I'd like to know. I can fab something, but if the factory bits are there, better still. TIA Cheers, Dave

 

There's a square ring welded to the rear wall, nearish to the middle, which I recall being a secondary attachment point for car seats and the like, and the factory seatbelts, which should be there if you didn't remove them.

As I recall there are also two brackets which bolt on, one on each side towards the top.

 

The attachment points in my 07 AC are on the PS side only. I removed it (them) years ago when I gutted the cab to put in a two part sound deadening system. Then had to find it (them) when my grandkids moved back to TX. There is another attachment point on the back wall, but my grandkids are in booster seats so that one isn't used. I wish that had them on the DS also so they could both ride in the back. Just glad that I can turn off the PS front air bag.

The one in my truck looks like this.

https://parts.olathetoyota.com/oem-...hJnk9MjAwNyZ0PXgtcnVubmVyJmU9NC0wbC12Ni1nYXM=

 

That’s how mine are to but was on the drivers side, which I wouldn’t even be able to sit in if there was a seat mounted there. I moved it to the passenger side and it bolted right up, I did have to trim the plastic panel for the loops to go through though.

 

Thanks all. Wet weekend here, so I'll pile into it. Cheers, Dave