White switchback won’t work

Hey everyone this is my first post been looking at this forum for some time now. Today I went to replace the turn signal/drl bulb. I replaced both bulbs, turn signal works but I have no white running light. I switched back to the old bulbs and I’m having the same issue. Is there a fuse I could’ve blown that is preventing me from getting the white light to come on. I’ve attached a picture of what they should look like. I’m very confused because even with my original bulb setup I have no white light. Literally was working 30 minutes ago before I started to change bulbs. Any help would be appreciated.

 

Are you checking with the truck off and does it need to be running for running light to come on?

 

I’ve checked with the truck off as well as running. I’ve also put the key in acc still nothing

 

Was your E-brake on when you checked them?
You have to have the E-brake OFF before they will come on.

 

I just checked e brake is off

 

That’s what I have now, no ebrake engaged headlights turned on

 

May be unrelated by check engine and “trac off” light just came on

 

Off topic, but what wheels are those?

 

Those are stock tundra wheels from 2011-15 tundras in running adapters but I haven’t had any issues and they really make the truck look a lot better

 

If you still have parking lights elsewhere, then a severed wired(s) could be the culprit.