Scan Gauge II Parameters

Hey all, I just bought a scan gauge II for my 2015 toyota tacoma with the 4.0. Does anyone know the parameters to punch in to monitor my Trans temp 1, trans temp 2 and oil temp?

 

See my post #71 here for the trans codes. One for pan and one for torque converter output. No engine oil temp in these trucks to my knowledge

https://www.tacomaworld.com/threads/who-is-running-a-scangauge-ii.356520/page-4#post-27501685

 

Cool, thanks

 

They worked, thanks man

 

If someone is aware of the oil temp parameters if they are out their, please share.

 

There is no engine oil temp sensor on a 2nd gen so no oil temp reading, you can see coolant temp in the statdard list though.

 

Ok, I thought I remember one of my other scan tools being able to read that. So, if that's the case, who knows what temp that was. Thanks guys

 

There may be a PID for oil temp but it's a calculated value, there's no actual oil temp sensor.

 

ok, gotcha. It probably was a pid, it was a obdlink mx+ that i used before. Its been awhile since i setup my screen on that scan tool. Thanks guys, i knew someone on here would be able to give me the info i needed.