Electrical Issue ..

Good Afternoon ..
My problem is that I have no power at the #4 location - interior, 7.5A ACC.The fuse is not blown, after doing power and grounds check confirmed no power present. Over the past few years had issues with the power mirrors not working all the time so i decided to replace the switch this weekend after doing so i now have no mirrors, radio or power outlet. Any suggestions would be helpful I am thinking of removing the fuse box (if that's not a huge job) and running a "new power wire" to that fuse location...

Thanks.

 

So you have no power at either side of the ACC fuse with the ignition switch in the ACC or Run position?

 

Correct ...

 

I think Dm93 is suggesting the culprit may be the ignition switch. He may be on to something there.

If you decide to disassemble the fuse box, I did a thread on that.
https://www.tacomaworld.com/threads...-box-battery-wire-replacement-upgrade.420450/

 

Nice write up but its the box on the inside that i would need to work on ...

 

Then you need to check Pin 2 (White/Green) at the ignition switch and see if you have power there in ACC and Run.

 

Thank you !

 

Position of terminals are while looking into the mating side, not wire side.

 

Thank you!