Will 33’s fit??

Is anyone running 33’s with the TRD 2/1 factory lift?
Wondering if they fit with no rubbing?

thank you

 

Yes

 

Ok thank you

 

Wheel specs matter more than lift.

 

I have 17 inch 4-runner TRD pro wheels

 

Next question which 33's 285/70r17, 255/80r17. 33X12.5" all require very different requirements to fit

 

285/70/17

 

To echo what Clearwater Bill said, your wheels are more important than a lift. If you have 0 offset wheels then you probably will only rub in flex offroad. If you have high positive or negative offset you'll either run into the UCA or cab mount. Not all tires are the same despite having the same size printed on the sidewall. K02's run narrower and are typically easier to fit. Some mud terrain tires will be slightly wider because of large protruding biting lugs. What tires are you looking at?

 

I’ve heard the BFG KO2 run smaller than other brands. Might want to keep that in mind as you research.

 

Wheels are 17 in. By 7 with a 4mm offset

looking at getting Yokohama Geolandar MT in a 285/70/17

 

There is no way I would run 285s on the 4R wheels. That's pushing the limits of a 7 inch wheel.

People do it and will claim that its ok. But it looks like a 300 pound man tucking his shirt into size 32 jeans.

 

Rock Lobster that makes a lot of sense.

I appreciate the feedback

 

Personally I'm running 255s on the 4R Sema wheel. Its an underrated combo in my opinion; It gives the truck a clean look and its better balanced with drivability and performance.

There are many examples scattered throughout this thread:

https://www.tacomaworld.com/threads/the-skinny-on-skinny-tires.529656/

 

They're for sure a better option for daily drivability. Better fuel economy. More often than not they are a true 33 (not 32.8 like the 285's). If OP is mainly going for looks then imo they don't look as good on the 3rd gen as 285's do.

 

I disagree, but that's because I'm a weird dude with weird opinions. Fat tires are played out.


A skinny 32" - looks more refined. It looks like what was supposed to be on the truck in the first place.

 

Good looking truck, big fan of the soft topper too. I do think the 255's can work on 3rd gen - one of my favorite builds has skinnies. BRC_Kaveh with skinny 35's.

I was so conflicted between 255, 265, and 285 when I got my latest tire. If places had the 255 AT4w in stock I'd probably be running those right now, but I ended up with LT 265 AT4w instead.

 

depends on wheels and tires......more info needed

 

might be a normal look at the mall

 

Skinny 33”s ftw