What Have You Done To Your 3rd Gen Today?

DOA either party? Or just dents?

 

I regeared to 5.29s from ECGS recently, so I finally get to use 6th again. That being said, I spend my freeway time between 2,000-2,300 rpm.

Maybe I should get a loud exhaust to drown out the horrendous moan coming from my rear diff at 60-65 mph

 

Under 2k is bearable but above and it’s all up in your business lol

 

I've felt that pain. Hopefully you can see the light at the end of the tunnel.
The BA Hiline bumper with wings was cheaper than the OEM parts it replaced.

 

Installed FN 16x8 0 offset Countersteer type x yesterday, Wrapped in Toyo AT3 265/75/R16. Also installed Anytime front facing camera for my Trail Edition.
Shoutout to Dustin of FN wheels for the awesome customer service and impeccable packaging.

 

Deer is dead. I'm fine.

The Taco doesn't have any dents that I can see, but there is a lot of broken plastic. I thought my grill was OK (the honeycomb doesn't have a scratch) but the inside is all broken. Air dam, fender liner, fog light mounts & trim, bumper covers, and other bits broken. But the actual bumper seems solid an straight. Damage appears to be mostly cosmetic.

 

Purchased a mini-me for the Taco

 

Pumped grease zerks!

 

Been awhile since I posted.. so here's a list of things I've done recently.

Installed LambTek Winch Switch Bracket Kit.



Installed an overhead switch panel from @ITmaD in anticipation of getting a front locker.



I've been installing Hardkorr lights in my camper and got a neat light switch panel & remote from ASG Offroad.



And installed ASG Offroad monekybars on top of the camper (ignore the tree I need to trim)

 

Do you dual awnings?

 

Lol. Right now I do. I just got the 270, so I might take the 180 off. Not sure tho.

 

that plastic cosmetic stuff is expensive

 

Wait, wait, wait simple skater math says that they overlap each other?

 

That blows. Might need an exception as its a relatively small site. This is what the main page looks like. Full screen shot so you can see the web address.

 

Forced to purchase a new washing machine and was stuck waiting for delivery. You know, the old, "between 0800 & 1730".
Not enough time to do the lift kit or the front bumper and I had these bad boys laying around so I mounted them in some decent spots. Mostly for puddle lights. Gonna' try and tie them into the door switch circuit so they come on when the doors are opened. Maybe when its not so hot outside. I am cooked.
I used this funky tab up front that supports the engine splash guards and found some nice spots in the rear that won't interfere with the suspension reservoirs and will enable me to tuck the wires into the existing wiring harness on the frame. Gonna' tuck the fronts as well.

 

Looks easier than how I mounted mine. I drilled the step bars and mounted them.

 

Just mounted the 60 inch drawer slide I’ve been building for the past few weeks. Still gotta organize for camping/cooking but basically complete!

 

As mentioned earlier iOS doesn’t flag it, only Win11. Not serious about buying, at the research stage.

 

Threw an OEM roof rack on. Now, need to convince my wife to let me get a Portabote, Old Town, or Hobie...