1 gen tacoma gas pump electrical diagram

Hi, first time here, I just swaped a 1988 f150 secondary gas tank on my tacoma and I am now doing the electrical connection from the f150 gas tank to my stock wiring and I need a simple clear electrical diagram of the stock connection that goes on the stock tank. I already have the electrical diagram for the f150 but I couldn't find one for the tacoma.
thanks in advance

 

Most electrical wiring diagrams won't have those 4 wires all together on one page.

L (Light Blue) is your 12v+ for the fuel pump from the relay
W-B (White with Black stripe) is ground for the fuel pump
Y-R (Yellow with Red stripe) is for the fuel sender to combination meter
BR (brown) is ground for the fuel sender
These all run to the BN1 connector under the driver seat

Y-B (Yellow with Black stripe) is for the low fuel light, but yours doesn't have that

I have attached the "Engine Control" Diagram that has the fuel pump wiring
I have attached the "Combination Meter" diagram that has the fuel sender wiring
These are for a 1999 3RZ, but it looks like the colors are the same

 

Thanks alot I've connected them perfectly.

 

Update for the dudes that will do the conversion, 1988 ford 150 tank and pump put out 0.3 psi of pressure and 3rz needs at least 80psi of pressure and 40gph (gallons per hour)
So you will need and you can just swap the tacoma pump on the ford pump module.