Trail Edition Wheel with 0.75 Spacers

Thought I'd share what the Trail Edition wheel looks like with 3/4" spacers installed for anyone considering spacers on their TE. I love these wheels but they needed a little more poke. Tires are 265/75/16 Toyo AT3.

 

Looks good

 

OP- how did you get .75” spacers? Im assuming they are the flat disc type, which I would highly recommend against. Spidertrax or similar(stud type spacer) are the only spacer to run, the flat ones reduce lug nut engagement on the lug(improper tq due to reduced shaft/shank engagement) and are not hub centric(important for balance). Just my .02

 

They are .75" BORA spacers.

 

The Bora 3/4" will work with a lot of rim styles. Most rims have a series of small notch's on the back side so that the OEM stud can slot into it.

Bora and Spidertrax are the only two brands that I recommend.

 

I’ve never seen those, that is amazing how thin they can machine them now. Do you have interference issues when mounting the wheel?

 

No interference with the Trail Edition wheels. Pockets on the back of the wheel leave plenty of space.

 

Looks sick! I did the 1.25 on mine but the .75 look great!

 

Thanks! It's coming together

 

Can you post a link to the spacers?

 

Also, did you have to make any modifications for that size tire to fit? Just got a 2022 Trail Edition but it has some regular highway tires on it, so I’m looking to upgrade those.

 

https://www.motorsport-tech.com/index.html

 

No tire fitment issues for me. I didn't put them on until I pulled the stock suspension and installed the Kings though. Kings are still set as they came from King. Mudflaps did have to come off but those were coming off anyway. I'll get a very slight rub if I hit a drive entrance too fast but no issues off road yet. I am speaking to the setup with the 3/4" spacers though. There was zero rub without the spacers.