Anyone know what these are for?

I had these in my center console. I assume maybe they are for the AUX switches but if so then why not 3 since I have 3 AUX switch and why different part #'s.

 

I do see 3.. two in the bag on the right and 1 in the bag on the left. Without searching part numbers.. a quick thought is is probably why the part numbers are different, for the packaging itself.

 

Different part numbers because it has different pigtail connector

 

Thanks for posting this. I was literally just looking for these part numbers. You saved me a lot of work and time! Those are $96 and $54 each, so don't throw them out.

 

I'm thinking one of them is for an Aux Brake Controller (trailer).

 

No they are for the 3 Aux Power switches by the control panel by your left knee. Hidden under your truck are 3 Aux. wires for anything that would need power in that area. I think there's something showing the locations in the manual.

 

All three pigtails are different. Must be some vehicle somewhere that only uses the one in the separate package. It's similar to one of the others but does not have a connector on both ends.

 

I thought there were only two and the one in the bag that looks like two was one but split off. I will look closer when I get home.

 

Shows 1pc, 2pc on the label

 

Ok so here are the connectors. 2 are the same and one is different. Can’t imagine they are for all three of the aux switches as why would the connectors be different?

 

This was in another 4th gen thread a few days ago. May be related.



You may be able to look in those locations & confirm if your harnesses fit.

 

The top pic is bare wire capped for storage. The bottom pic have two commonly used Toyota connectors. Probably included for plug-and-go to Toyota brand accessories of your choice. Whatever exists now or in the future.

Edit: If you don't plan on using said connectors, wire cutters can turn them into bare wire like the top pic.

 

I can't remember where I saw it, but I think the one with connectors on both ends is used for the truck bed connection point.

 

Different part numbers because they're different parts..

 

See this thread for explanation and photos

https://www.tacomaworld.com/threads/unused-connectors.838194/