A/C

Whats up guys.. ive looked up as many thread as i could but cant find one with the same problem as me .. it started last week on a really hot day .. if i run my a/c to HI it will run for about 2 minute then the fan stop.. i turn it off and back on im good for 15 second .. and its only doing this on HI speed .. if i keep it to 3 it will never stop .. doesnt look to be the resistor from what ive read .. just wondering if anybody had that issue and found the problem
Thanks in advance guys✌

 

Pull the A/C control panel and check it for signs of overheating at the connector.

https://www.tacomaworld.com/threads...lay-mod-prevent-blower-switch-failure.827331/

https://www.tacomaworld.com/threads/2nd-gen-information-diagnostics.784008/#post-28042158

 

Thanks ill chek that

 

Check your blower resistor plug for burn marks, that can surely cause intermittent fan. You may even want to turn AC off, put the fan ON, and wiggle the connector on the blower resistor. It could even be a bad motor but replacing the resistor next is a cheaper fix.

 

Give it a little time for the resister to cool down when/after after this happens. If that resister is still hot when you grab it (or any of the other connectors) it will give your fingers a good burn.

 

Resistor isn't in play on high speed, ground goes directly from the switch to the blower motor on high.