Transmission R-A60 manual transmission information . Your 6 speed transmissiom (WRITE UP )

Hmmm…
I have a stupid question for @gearcruncher or anyone else who might know!
Is there anyway the Toyota R-155 5 speed behind the 2.7L I4 2TR-FE can be attached 4.0L V6 1GR-FE?
Bell housing to engine or mount the R-A60 bell housing to the R-155 transmission?
Now remember I said stupid question…

Thanks in advance!

 

Does anyone know the part numbers for the bolts that go through the bell housing and into the block? One of my 14mm bolt heads is stripped, I’d like to order a replacement before I drill it out.

 

90080-11426

Jeff

 

I have a question. I’ve got a 2010 Prerunner and wanting to swap to 6 speed. I found a 2008 x runner and don’t mind keeping it 2 wheel drive and would to use the transmission from that. I was wondering if anyone has done it before and what problems I might run into. I’ve been trying to research parts and compatibility but not sure if the drive shafts or mounts will match up. I’m expecting to have to find a crossmember and maybe swap out drivesaft pieces from either one. If anyone knows more that would be helpful.

 

Ok..I'm confrucketed now. 2012 v6 4x4 6 speed. I did my clutch and TOB in January. I'm getting a squeaking/squealing while in neutral now. If I push in the clutch it goes away.

Do I need to adjust it or lubricate the input shaft behind the TOB?

 

Double check the adjustment of the clutch pedal and if that doesn't do anything, turn up the radio and learn to live with it. It's brand new, you know it's new. They will start to squeak at some point, but that doesn't mean it's necessarily failing or in jeopardy of failing or that you did something wrong. Its what they do. Continue to monitor it and it gets worse or becomes a grinding noise, investigate further.

 

Thanks for the input. Slight pedal pressure makes it stop. I was curious if the OP was correctly stating that the TOB shouldn't be spinning in neutral.