3rd gen Tacoma 2.4” lift?

Hey all, I recently got a Dobinsons suspension lift kit, with the following parts

Front Springs:

• C59-352 – 2.0” lift with heavy load (110-240lbs) front end
  • 2.4” lift with stock front end

Front Shocks:

• $356 GS59-221 Dobinsons Pair of Front Struts Compatible with Toyota FJ Cruiser 2006-2010 and Tacoma 4x4 2005-2018 - GS59-221
  GS59-221 twin-tube nitro charged, no extra lift

Rear Leaf Springs:

• L59-110-R – 2.1” lift light / medium load

Resr shocks

• $315 GS59-940 Dobinsons Pair of Rear Shocks Compatible with Toyota Tacoma 4x4 2005-2018 - GS59-940
  GS59-940 – twin-tube nitro charged, good for 2” – 3” of lift

The big issue is, the more I look for similar builds on the internet with a similar tire and 2” lift setup (running 265/70/17), my setup seems not lifted to me for some reason, which I find really strange, as it should be a 2.4” lift in the front, and a 2.1” lift on the back. I’m wondering if you guys can help me figure this out, does it look lifted? If not, why do you think that is?? since I got everything as specificed

Current pics with the supposed 2.4” lift:

 

Stand next to a stock height Tacoma and you’ll immediately see it.

 

Yep Now go drive it and quit looking at it

 

looks good

 

If you need to quantify it, measure from the center of the hub to the fender

Stock 3rd gen are like 21” in the front and about 22” in the rear. They do vary a bit even for stock height

 

No before and after measurements?

If you don't have surveyor eyes, it's the right way to know.

 

where is the before picture?

 

How do those shocks perform? My cheap rancho N3s are leaking after 3 years

 

I measured it the way you said and it turned out to be 21” front and 22” on the back, basically same as stock. this just doesn’t make sense to me

It should be 23” on the front and 24” on the back…

idk what to do or what might be going on

 

Did you install the lift yourself?? Maybe you should have.