1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

CEL 219A & 219B

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Shamck, Aug 6, 2024.

  1. Aug 6, 2024 at 5:42 AM
    #1
    Shamck

    Shamck [OP] Bikelife

    Joined:
    Aug 5, 2017
    Member:
    #226029
    Messages:
    41
    Gender:
    Male
    Toronto, Ontario, Canada
    Hey there, I got a 2015 4.0 with about 205,000km on the clock, vehicle has been nothing but good to me since ownership at 35,000km. I have a full afe exhaust system from the headers back and afe Intake system as well on the vehicle since roughly 50,000km. I just got a CEL for 219A and 219B, air to fuel ratio imbalance between bank 1 and 2. So far I've cleaned my MAF sensor, checked for vacuum leak, checked spark plugs ( which have less than 30,000km, iridium) changed air filter, checked purge valve, still getting the code. The vehicle runs completely fine, no misfires, no power loss, no MPG loss. Yes I've cleared the code multiple times and they both come back. Both my 02 sensors and AF sensors upstream are original, but i find it hard to believe bank 1 and 2 failed at the same time. Any insight on what else to check? Can't find much other information on the forums or online in general besides checking the things I've already checked
     

Products Discussed in

To Top