What harnesses?

Are you able to just cancel for the Meso V5 harness?

I’ll still need the halogen T.

 

For grille lights?

the MESO one is the same for DRL and park just no diodes and no ground.

I can just send what I packaged up and comp you the v5 part.

 

Yes I have my V2 grille with the lights on the way.

Thanks man! I appreciate all the help so far.

 

I received the harnesses today. Is it supposed to include the connector circled below? It wasn’t included in the bag.

 

I don’t bother with a cap for a halogen T because there isn’t any good reason to leave the T in place but capped.

I do include it with Oem led conversion harnesses as that’s where it’s likely possible to need headlights but not the grille lights if you removed them.

If you have need of one I can send it but like I said, it’s no value.

 

Got it. Are there instructions online on how to install the halogen T to grille lights?

 

https://www.tacomaworld.com/threads/howto-connect-ebay-grille-lights-or-fbc-t-harnesses.759814/

 

Will I need a heat gun for the solder or will a hair dryer do?

 

I’m a fan of heat guns. They are not expensive. But I think a hair dryer works or even a lighter.

 

Did I hook up the right connectors?

 

drivers side

 

I mean the feed is on the right side of your photo. red is positive, black is negative.

 

I meant am I connecting to the correct connector on the headlight assembling with your harness.

 

There's only one of that type of connector near the headlight. As long as you don't T off an O2 sensor, yes, it's the right one.

 

Everything looks good. It’s all working. Thanks