1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

BHLM Ribbon Sealer??

Discussion in 'Lighting' started by dza1284, Apr 9, 2011.

  1. Apr 9, 2011 at 12:15 AM
    #1
    dza1284

    dza1284 [OP] Well-Known Member

    Joined:
    Sep 30, 2009
    Member:
    #23595
    Messages:
    369
    Gender:
    Male
    CA
    Vehicle:
    08 OR Short Bed Dbl Cab
    Bilstein 5100, 2" AAL, Grille, BHLM, Footwell LED, Dash LED, Aero exhaust
    Viet2100 BHLM thread says to use 3M Window-Weld Ribbon Sealer. Unfortunately a lot of local stores do not carry this. Autozone carries a similar prodcut but it is not called window weld. Will this stuff work the same? This is for re-adhereing the headlight lense to the bezel after the BHLM.


    This is the recommended ribbon sealer from 3m.
    http://solutions.3m.com/wps/portal/3M/en_US/Marine/Home/Products/Catalog/?PC_7_RJH9U5230GE3E02LECIE20S4K7_nid=GSJZ5GZYTKgsQH8HT14PGTgl34QXLJFH1Jbl

    This is the ribbon sealer that auto zone carries (isn't called window weld, not sure if that is just a brand name)
    http://www.autozone.com/autozone/accessories/Metro-3-8-in-x-15-ft-round-bead-ribbon-sealer?itemIdentifier=501842
     

Products Discussed in

To Top