Overhead switch panel (sunglasses holder replacement)

Hey Tacoma world,
Here is a custom overhead switch panel I made that replaces the sunglass holder on my second gen. I 3D modeled then printed the part, sanded it, and hit it with some paint and clear coat. I have three rocker style switches installed and a voltmeter but the electronics can be exchanged for anything else that fits.

Heres a link to where you can buy one:
https://www.etsy.com/listing/1783804726/tacoma-switch-panel-mod

Here's a link to where you can buy the .stl file if your like to print your own:
https://www.etsy.com/listing/1782186364/second-gen-tacoma-overhead-switch-panel







here’s some photos of the part being made:

 

That's a pretty good color match to the OEM plastic, nice job

 

Looks amazing!! Would you mind sharing the STL file for the print?

 

That might just be the best looking 3d printed part that doesn't look like a 3d printed part.

 

That looks like a very clean looking mod and install. Nice job!

 

Very clean!

 

What are the switches controlling?

 

Looks good. Why not just model in the openings so you don't have to cut anything? Also, you could use heat set inserts for anything that needs to be bolted in.

 

What's the other sunglass holder item?

 

Looks like temp and compass. I have mine in my mirror, but that works too.

 

Yup, thats where older 2nd gen had the temp and compass

 

Sure but where would one find that particular part? I have an old sienna mirror that does compass but I don't have the temperature or time on my 2015 taco

 

@JakesRedTruck how much would it cost for you to make one?

 

looks awesome, what paint did you use as i need to find some lol
here is my v1 setup to test and see how it holds up. clicks in place with no screws.

 

What radio is that above the mirror and what are you using to power and mount that there?

 

mount i made, its for a yaesu radio. its just a remote face, powered by what looks like a netowrk cord. main radio is behind the back seat.

 

Meso Customs used to carry a few different configurations. Not sure if they still make them or not, but they're on the website still:

https://mesocustoms.com/products/2nd-gen-tacoma-overhead-switch-panel?variant=19983117353073

@JakesRedTruck can you shoot a picture of the SKU label for the can of spray paint you used? I used to have a good Rustoleum color match but I can't find which shade it was, yours looks like it's really close.

 

Sure thing, heres a link to my esty where im selling the file and will soon be selling the finished product:
https://www.etsy.com/listing/1782186364/second-gen-tacoma-overhead-switch-panel

 

I still havent fully decided on a price yet, but a ballpark for a finished part WITHOUT any electronics installed I would say around $70 and with electronics around $100. I plan on doing a run of these parts in the near future, if you'd like to get your name on the list send me your email.

 

Thanks man much appreciated. If you have any interest in buying one send me your email.