1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2.7 Liter engine Removal

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Johnwork06, Sep 5, 2024.

  1. Sep 5, 2024 at 9:09 PM
    #1
    Johnwork06

    Johnwork06 [OP] New Member

    Joined:
    Sep 5, 2024
    Member:
    #456522
    Messages:
    1
    Gender:
    Male
    Vehicle:
    2006 tacoma 4 cyl 2wd
    Making this post because I haven't seen one like it. If you have to remove your 2.7 liter engine it is not that hard. It is easier to do so with a long reach cherry picker or forklift. You should leave the transmission on the engine. For lift points I wrapped a chain around the driver side engine mount and bolted the chain in to the furtherest back exhaust stud. You can leave the accessory drive on and starter but disconnect all wires including the O2 sensor connected by the end of the transmission.
     

Products Discussed in

To Top