Bolt part numbers

Howdy y’all, I have been doing fluid changes and some bolts have started stripping over time .
Does anyone have the part numbers to replace:
Transmission fill bolt
Front differential drain bolt
Front differential drain seal
Transmission drain bolt
2010 v6 4x4 (for reference)
Links are also appreciated

 

Parts # below.
The link here has specs too. : https://www.tacomaworld.com/threads/2nd-gen-diy-maintenance-quick-reference-guide.438945/

All Parts # came from the link in posted at the bottom of this post.

Transmission Fill Plug: 90341A0001
Transmission Drain Plug: 9034110018
Front Diff Drain Plug: 9034124014
Front Diff Drain Washer: 9043024003



Transmission Plug: 90341A0001

 

Note that the transmission pan bolts (overflow and drain) are better if tightened by feel, rather than according to the torque specs. They both use crush washers so you can just tighten by feel and then observe for leaks.

I recently had to swap out my trans oil pan because the 21 lb-ft drain plug torque spec from the factory is way too high and caused the threads to strip out. There's not a lot of meat on those threads in the first place either.

 

Found that out… had the same problem with my drain plug