What Have You Done To Your 4th Gen Today?

I finished up my stealth radar detector install this weekend.

I don't like having a visible radar detector as it can attract unwanted attention (from police and criminals). I wanted to use a switched power source because I travel to VA that has radar detector laws. I run the JBV1 companion app to view alerts, so no need to see the display.

I used the pre wired AUX 3 switch(5 amp) with the driver footwell pig tail port (port B). You use the white pigtail wire for + and the white with black stripe for ground.

I ran a length of wire along the the lower door channel to back seat.

I installed the radar detector in the rear center seat headrest. With a little foam cutting, my Valentine One fit pretty snuggly into the headrest. Anything larger would have been hard to get into it.

Some quick testing with some roadside radar showed minimal impact on radar signal detection as it's got clear sight to front and rear windows. LIDAR is probably gone but that doesn't really matter as I don't have a jammer.

 

Why ?

 

Ignore the troll

 

Had my 1 st fill up today and instead of it being around 60 for my 17. It was just a little over 45 for my 24 .

 

Did you read what I wrote?

 

Front PPF + Ceramic

 

I took a picture of it.

 

Is that a wrap? I love this!

 

It's just a decal you can purchase from etsy.

 

With the color of your truck, it is a match for the state of western forests last few years.

 

How did you get rid of the chime? I did it on my Tundra and 16 Taco with Caristsa or something (cant remember0.

 

I’m waiting for the 6’ bed one

 

Installed leveling kit

 

That’s exactly what I used to stop mine

 

Nice, would you mind, how did you removed the emblem?

 

Make sure you have a torque wrench capable of the proper torque. I have a link in the post I did on my Smartcap. $30.

 

There's 3 tabs on the inside of the emblem you just have to release them..

 

Added the ARK micros for a “little” bit of protection.

 

Added redline tuning hood struts. 5min to install, the only part that sucks is they are pricey.