3rd Gen Moog LCAs and Cam Bolts - Sized wrong?

I'm dealing with the seized cam bolt issue in my 2018, and was going to attempt to cut the bolts and replace LCAs and bolts on my own. Gathering the materials, I ordered Moog LCAs and a set of Moog cam bolts for each side.

The cam bolts, which both RockAuto and Amazon have listed for 2018 TRDOR, don't seem to be the right size. Are the sleeves supposed to have a gap in them? I was under the impression that they should fit fairly tight. See attached pics where you can get an idea for the gap between the sleeve and bushing.

The part numbers that I have acquired are:

LCAs: Moog RK623413, RK623414

Cam Bolts: Moog K100129

All parts are listed as compatible with 2018 Tacoma. What am I missing?

 

Those are the correct part number for the bolts. But I have different arm part numbers in my notes for 3rd gen MOOG's. I do a lot of suspension installs for our vehicles.

Edited for the wrong part numbers.

 

Those numbers are showing up as incompatible, 2nd gen parts for me… am I mistaken?

 

I think you are right. My part numbers are off on that.

You could always use a set of freedom offroad arms too. I know that there isn't a lot of options for lower arms for the 3rd gen. OEM is considered the best of course.

I would also use OEM Cam Bolts if you can

https://freedomoffroadusa.com/front-lower-control-arms-w-cam-bolts-and-ball-joints-fo-t701-1fl/

 

I ended up getting the OEM bolt hardware and that seems to fit properly. Much better quality to, definitely the way to go!