2nd gen tacoma tube bumper

Hey all first time posting here. Just picked up a tube bumper that the owner had put on a 05’. I have an 07’ so same front end. The bumper has 4 mounting spots. Bottom 2 are I’m assuming going to the sway bar end. And the other 2. I don’t know where, that’s what I need help on. If anyone knows what to do, please help thank you!

 

Try this.

 

Yup. Tried that no luck. What you circled on the bumper is 2 holes each bracket. One bottom left one top right so it won’t go in the 3 studs on each frame side. Also, when I mock it up and put the sway brackets on the bumper to the mounting location on the truck, the top tube that is supposed to follow the body line does not match up, the bumper sits waaaay too low. So I’m taking it to a fab shop near by to have em re make me brackets to then allow me to mount it properly.