My speedometer stop working

My speedometer stop working after I got into an accident. after I changed the steering rack and lower control arm I'm getting vcs, brake and abs lights. And my speedometer is not working.

 

I changed the speed sensor by the wheel driver side and that did not fix it. I'm getting about 12.75V for the speed sensor driver side and passenger side.

 

With where that wheel looks like it got shoved I'd be suspect some wires got damaged in that area.
Have you checked what code(s) you have in the ABS?

 

Wires are good for the front. Its reading 12.75 volts on both. I had to order a code reader that can see the abs codes. I need to check the rear wheel sensors also.

 

The ABS module uses the rear sensors for vehicle speed, the module itself could have also been damaged as it lives right there on TRD OffRoad trucks.
https://www.tacomaworld.com/threads/2nd-gen-information-diagnostics.784008/#post-28042157

 

I did get rear ended. and then my left side hit the metal rail.

 

Well inspecting the ABS wiring back there would be a good place to start.

 

It was the passenger rear side that had a broken wire. This fixed it.