OEM 2022 TACOMA TRD PRO FOX WESTCOTT DESIGN FRONT SHOCK SET

I have a set of OEM 2022 Toyota Tacoma TRD PRO front shocks with the Westcott Design lift for sale. They have under 8,500 miles on them and are in great shape. There are some normal signs of wear but most of the blemishes came from shop uninstalling and handling them.

This would be an amazing upgrade for your 3rd Gen Tacoma as it will provide a 1.5" lift from stock height. The Westcott Design will provide a 1.5" lift. Visit Wescott Designs to read more about their amazing lift, it's NOT a spacer lift as it keeps the stock TRD Pro factory geometry and doesn't sacrifice the ride as intended.

If you don't want a full 1.5" Lift. You can negate to use the additional top hat and that will take off .75" from the 1.5" The already installed bottom collar will only provide a .75"- 1" max lift. So for the 2nd Gen, you'll be at a 1.75 - 2" lift from stock height. The top additional part provides the remaining portion of the lift and is optional.

Price is $900 Local Pick-up in Studio City, CA. Right off Woodman and the 101 Freeway.

The Westcott Design Lift Kit is $350 alone and doesn't include the labor to install it.
https://westcottdesigns.net/product/2020-2022-tacoma-fox-trd-pro-lift-kit-front-only/

 

Good deal. Wrong side of the country. GLWS!

 

How much lift over stock 2.5 Gen?

 

Quite a lot I think, if it really does stack up. Putting stock 3G on stock 2.5G is something like an inch; the early Pro was 1" taller than the later, which was 1" shorter than the later which these are..so we are up to roughly 3" and that is before accounting for the additional 1.5 aftermarket lift. I'd expect somewhere in the 3.5-4.5" range?

 

That’s what I was thinking,to much.
Only need 2-2.5

 

Here is an example, exact set up I am running. I added a 1 inch block to the rear, still about 1/2 to 3/4 higher in the front.



Here she is with the Pro shocks without the Westcott lift and 1 inch block in the rear.

 

Just to confirm, those are the later '22+ Pro struts you started with?

 

Good point, I overlooked the year. Mine are from a 2019.

 

Ok, thank you - super helpful for me as I have a rebuilt '19 setup I was going to put on my '22, now I know for sure it's more than I want for my '12. Which is a shame..but anyway, /threadjack

 

This set up will be 2.5" max. No way this will provide a lift over 3" from stock.

 

Dodgers Pre World Series Bump

If you don't want the full 1.5" Lift. You can negate to use the additional top hat and that will take off .75" from the 1.5" The already installed bottom collar will only provide a .75"- 1" max lift. So for the 2nd Gen, you'll be at a 1.75 - 2" lift from stock height. The top additional part provides the remaining portion of the lift and is optional.

 

Weekend DODGERS Two Game Lead Bump

 

DODGERS WIN IT ALL BUMP