windshield plastic removel

Does anyone know how to remove these black plastic along side of the windshield? i looked at the but is hard to see and i dont really want to break it or bend it. Want to see if i can fit 14AWG light bar wires there

 

don't peel that piece up, see here...

https://www.tacomaworld.com/threads/roof-rack-lightbar-wire-routing.723910/

 

shit i just figured it out too. Im buy that heat shrink. Thank you.

 

i hid it under that plastic. looks good to me

 

How did you get the wire under there? Did you remove the trim and reinstall, or were you able to flex it out of the way without removing it?

 

i removed the trim and reattached it, but i think you can flex it enough to fit the wires with a plastic thin tool. i was able to fit 2 x 14AWG wires just fine. If you pull it up a bit with a tool you will see 2 small white tabs (hook like) and i used another need like tool to pry each of them and it came off. I think there is 4 or 5 total.