Wisconsin Tacomas and bad financial advice

My projects involve

Proper drink

Proper music (usually RUSH)

and then.... Wondering where the hell that one tool went...

 

I actually didn't mind it and the rear bumper prep went far more smoothly than I expected. Having it professionally sand blasted was great (but a bit expensive) and then I did a lot of prep cleaning with acetone and hanging them in my garage for spraying. Some of you have seen the great finish that I got from the Steel-It. Easy to apply in my makeshift paint booth. Fumes were very strong, proper face mask required. Happy to share more of my prep and paint experience with anyone interested.

 

I did that for a few or several years with a 1/2" to 1/4" adapter....
Had me thinking maybe I never had one to begin with?

I'll never know.

 

I was taking mental notes during your process...

I swiped a piece of sandpaper across the shackle flip and was able to get through the heat stains, so I'm going to clean them up better.

 

Usually 5 minutes after I just set it down.

 

And then I find it 5 min after the project is finished.

 

I always liked BABOF

Bonfires And Brandy Old Fashioneds

 

Let's plan to do more of that!

 

I approve of this message.

 

Nobody will see these parts. So, I'm not as concerned about how they're going to look, as I am getting this first paint job to stick.

(too humid out for my liking, to do any painting)

 

Well, maybe if you have a Fred Flintstone car.

 

Dan, he's a youngin' he probably doesn't know who Fred Flintstone is.

 

F fuckup your plan and spend the next week trying to fix it

 

Exactly. Look at formula 1 drivers, they are in quite good shape.

 

I thought about that. I figured he would Google it.

Yes, this is a truck related topic. Fred was early pioneer of rock crawling. Barney Rubble was the first person to use the words,, bump it,,,bump it harder,,send it.

 

Only if you can scare the shit out of yourself every fortyfive seconds!

 

Remember when there was no google & we had to figure shit out on our own or go to the library.