B1650 - Module not responding?

I've been ignoring this code for a while. It would come and go but recently hasn't gone off.

When I plugged in my scan tool and tried to connect to do the recalibration, I got an error message.

I also noticed the module is greyed out on the scan tool diagnostic.

I will probably just live with the airbag light on but I'm curious of things I should look into to correct this issue.

Thanks

 

It looks like the module is offline.
I believe it's in the dash.

Let me take a look.

 

It's under the passenger seat.
See if there is a plug disconnected under the seat.

 

If it's not unplugged and you don't see any broken wires you need to check Powers and Ground to the Occupant Classification ECU under the seat.

Assuming you have bucket seats:

Connector O5:

Pin 1 (Red) Power at all times
Pin 7 (Orange) Power with key in run position
Pin (White/Black) Ground

 

It'll take a little bit to get some time to check this but I'll get back when i find out what i can. Thanks