Snug Top light and lock not working after taking it off

I’ve got a snug top which came installed when I bought the truck. Took the whole shell off for a bit to get some use out of the truck bed and put it back on this morning.
I only remember unhooking these wires (pictured) which I obviously plugged back in.
The problem is now the dome light is not working and neither is the lock feature when I use my key fob to lock the truck.
I don’t have a key to lock it by hand - it didn’t come with one.
The brake lights are working.

The fuses all look to be fine.

Need to get it locking and dome light going again, any tips?

 

Check the ground wires. Common problems with rear wires being tapped is ground wire connections get corroded with water and a little movement will break the connection.

 

The peeling vinyl tape looks a little sus, like some corrosion in there.

my cap just got filled with billions of tiny spiders when I stored it, then I sold it…

 

While you’re at it add some tape at those wires going through the bed wall. Looks like a future short there.