Icon RXT Leaf springs

Option 1?

 

Option 2

 

You have anything in the rear minus your camper?

 

These drawers and platform are always in and typically have some tools in them at all times. This is fully loaded before a camping trip. Both drawers are full in this pic. Rides great with the added weight.

 

Nice. You just leveled with option 2? I’m just going with 6112 just trying to find that perfect leafs in the rear with my midrise and drawer buildout too

 

I have about an inch of rake even when it is loaded up. Option #2 brought me like 2 inches lift. I have 5100 up front with 1.1 inch lift to keep a little rake.
This pic is also loaded up for a week long trip and has awning and all. Still has a little rake but it also wasn’t super flat ground so
We also sleep in the back at night.

 

Mine squeaked some for the first 10K miles. Not all the time either, it seemed to depend on the humidity. Now they don't or haven't in months.

 

All done. 5100s all around, set on 1.1 in the front. Option 2 in the rear.

Now for some 235/85/16s, any suggestions?

 

Looks good

 

Does anyone know the rear shackle bolt and nut size from an Icon RXT leaf pack?

I just removed one of the leafs in mine to go from option 3 down to option 2. When I removed one of my packs I noticed that it did not have a nut on that bolt. The nut was just simply missing. Doesn’t seem like the bolt had ever budged at all so that’s good. But I need to get a nut on there ASAP. I can’t remove the bolt to take to a store because the leaf pack would pop out if I did. Tried to eyeball it and buy a couple nuts, but the threading was wrong or they were too small.

I’m having a hard time finding a reference to that bolt size in the icon instructions.

 

It's an M14*...you're not finding it in the Icon instructions because it's part of the truck, not the leaf pack.

*corrected

 

many thanks! I couldn’t remember if I used the factory bolt when I first put it on or not. I was thinking only that top bolt was the one that came from the vehicle. Thank you.

 

M18 sounds too big, I think it's M14 (M14 - 1.75).

 

Correction...M14

 

Yeah, those are factory bolts.

 

Thank you guys. Got the correction. M14