What Have You Done To Your 2nd Gen Tacoma Today?

Happy Thanksgiving Everybody! Stay safe!

 

Here is something I don’t think has been done before. I needed a good spot to install an acc power and constant hot fuse panel and obviously our trucks don’t have much room in the dash area.

I found that in the center console, the bottom carpet panel (just corrugated plastic) can come out to reveal some through holes that lead under the shifter area to the dash.

I created a false bottom assembly from ABS. Fits very well, maybe a little too well as it is a pain to get back out hence why I kept the longer 2.5in screws poking through with the brass caps for some finger grips.

I still have to file some notches for the power/ground outputs to fold under the panel into the aforementioned console through holes.

Really excited to install some gear!

 

Happy turkey day

First daylight look at my cut front midflaps :x

 

Taking @Corny Taco’s wise words into account, I made the first measurements and cuts for my rear seat delete setup.

Used dowel rods with wax pencil on the tip to measure initial mounting holes. Rechecked everything with cab measurements, etc.

Hopefully nothing is too off center. Waiting until tomorrow to drill pilot holes and install rivnuts at mounting points.

Hope y’all are having a fine Turkey Day!

 

Started to weld up my winch insert in my bumper. Changed my Oil/ switched to 0w30 for winter and installed new battery I also Sent back my marlin crawler lower control arm brace today as They sent me the wrong kit I have to wait for the correct one now.

 

I need to do this for my cheapshit Hooke Road console safe that removes the inside, letting things fall into cracks

How’d you make the false floor? Cardboard template first?

 

Coolant flush. Was happy to finally flush everything out.

 

This is an awesome idea! I really like it!

 

The stock corrugated plastic at the bottom will slip out with the help of a butter knife. You can use that to trace the bottom and top ABS plastic panels.

 

Spent some time today to install my Mechman 240amp High Output Alt today along with the new Gates smaller sized serpentine belt it requires. Also threw in the 300amp fuse into the external alt fuse holder. Everything went easier than expected surprisingly.

 

What do y’all think of the pro style grille on a 2nd gen? Just put it on and not sure if I like it.

 

Got the winch insert welded up and test fitted.
Paint next.

 

I don’t hate it. I think it looks good.

 

Test fit

 

Does this count?

 

too bad there was a gst break on supercharger lol. You beat the 25% tariffs also on the supercharger also. Your truck is really clean. I from Ontario also.

 

That’s what made me jump on it, just in case lol!

And thanks man! Whereabouts are you from??

 

Pulled the rear driveshaft and rebuilt it with new Spicer joints and a new carrier bearing. Went ahead and wire wheeled it and painted it black while I was at it. Of course I goofed and had to pull a u-joint and flip it to put everything back to the factory orientation.

 

Finally got the repowdercoated wheels back on the truck. I love the contrast, so much better than plain old black.

 

Milton. I think I saw your truck at a sotec meet earlier this year .