OFFICIAL - 3rd GEN 275/70r17 Tire Thread

Went in to America's tire today and ordered a set of Toyo Open Country Trail RTs. They will be mounted on a set of SCS Ray 10's in Gun Metal. Tires and rims onto my 2019 SR5 acsess cab. 2 in lift, Color - Quicksand

 

No rub at pretty much full stuff here. Buddy has a near identical setup suspension tires etc only difference is UCA my alignment pushed the wheel about a half inch further forward than his that is the difference between me not rubbing and his rubbing

 

What brand of tire do you have ? What are the backspacing on the wheels?

 

I have been pulling late nights trying to find a post with the ray10s with the 275/70R17, are the wheels the 17×8.5 -10 with 4.30bs?, you have zero rub with no CMC ?. How many inches is the medium. OME lift? I have bilstien 5100 all around with 2" front and 1" rear block. I have the ray10 17×8.5 -10 4.30bs. I want to go with either the 275/70R17 falken wildpeaks or the 285/70R17 and have been worrying they will rub

 

what kind of tires do you have on it with those wheels specs? Any mods to deal with the rubbing?

 

Clean setup man. How much rub are you getting ? Did you do a CMC?

 

someone after my own heart. Got a set of these rims (and caps) on the way. Surprised those tires fit! How have they been? Any rubbing after some time?

 

Definitely some rubbing with 275s...

 

275’s

 

Open country rt trail

 

I’ve been leaning hard to put this setup on. Probably next summer I’ll need tires and would like to get this size. I’ve got the bronze TRD 4 runner wheels so same setup. You have any lift at all? Any rub you’ve noticed?

 

About 2” lift front and rear, which has settled. I also have spidertrax 1.25” spacers. No rub. For a long time I was gonna go with 285/75/16 and just decided to get those wheels instead.

 

Just bought my first tacoma. It's a 2017 sport on an eibach stage 2 kit, has 285/75r17 falken at4w on trd wheels (not 100% on the exact size specifications on the wheels). But nonetheless, this current setup is rubbing pretty badly on the ucas and the previous owner just kinda put up with it. Was wondering if 275/70r17s wouldn't rub or at least would fit with some plastic trimming at the most. Honestly don't want to either deal with this rubbing constantly or be forced to do a cmc this early into owning the truck.

 

I haven’t experienced any rubbing… I have wheel spacers, and the front bumper is aftermarket so there is a lot more space on the leading edge.

 

What are you guys doing for a spare tire? Would I be ok just using the stock spare on my 20 OR? Does a 275 fit in the spare location?

 

275 may fit tbh, but I am running a cheap used 255/75R17 (same height) stock BFG KM3 from a Jeep on a 17" steelie from a 4Runner. Found both on FB marketplace and the whole setup cost me $75, including mount/balance at Walmart.

 

Matching spare it fits in the stock location just fine

 

I agree, except I had to pound on the brackets a little with a rubber mallet for a perfect fit.