Cv axle boot rip advice

Sup guys,
Anyone had issue with thr cv boot breaking, grese everywhere, Whats best to replace both axle or just buy the boot?

 

it would help to see or at least describe your setup so that we can figure out why it ripped. If it's a symptom of a lift kit then you will most likely need extended CV's and not replace them with stock ones.

 

It has a 6” lift 20/33’s, bought it like that,,

 

Drop bracket or what?

 

^

 

Inner CV boot? You can buy a boot kit for cheap and swap it in: https://www.rockauto.com/en/moreinfo.php?pk=1378666&cc=1431544&pt=2284&jsn=488
Fairly easy DIY job and can be done without any loss of diff fluid:

 

Likely overlifted. If the cv bellows touch at ride height they will fail.

 

Yeah i didn't want to generalize lmao

 

Whats wrong with hawaii?

 

Absolutely nothing. There's just a Hawaii stereotype of massively lifted Tacomas on 8in block and spacers or 12in drop lift bracket kits. Again, that's why I asked what the suspension setup looks like because I didn't want to assume anything.



If your setup is anything like this you're going to just keep blowing up stock CV's.

 

Nah, mines not like that, looks sick but police are strict on my island..

 

Then were are the pictures sir!?

 

I guarantee you that truck has better cv angles than 75% of the lifted trucks on this forum due to the drop bracket