What Have You Done To Your 3rd Gen Today?

Is that OEM LEDs on the SR? Setup looks good

 

I sleep curled up like a roly poly anyhow.

 

It is trashed! Part it out!

I will give you $25 for it.

 

Returned the Rough Country tonneau cover that didn't fit. Looking at Real Truck Truxedo now. Making sure I get full refund from RC, first.

 

It only has 71K? I bid $27.

 

72k miles plus change ... no more than $25. And he runs it at 65 MPH ... merciless!

 

Ya I bet. I'm going passenger side, there's a nice area to bolt to, but I have to get more 7AWG to extend it to the battery. Should be here tomorrow, then I'll know. Plus, I have extra subwoofer power supply on driver side making it even tighter.

 

Good luck, have the same setup. Check out the Auxbeam forum, under the Lighting forum for help.

 

This thread has some good info on installing the AuxBeam.
I've had mine mounted for almost 18 months now.

https://www.tacomaworld.com/threads/8-gang-switch-panel-auxbeam-amazon.641431/page-19#post-28399438

 

You forgot to put the 2nd lock washer ring on under the nut and if the nut giggles loose, the switch is gonna fall out of reach. Also, is it on a fender or other location prone to weather? Well that’s not a waterproof switch - just saying. Get one that is coated and has a neoprene cover on it, else one day you’re not gonna be able to start your car because the switch is not going to work.

$18 BEP 1002016 SPST PVC Coated Toggle Switch With Wire Leads - Off/On

https://www.amazon.com/dp/B07B6K6XC1

 

Paying off the truck way ahead of time.
The check is in the mail...tomorrow.

 

Best mod ever!

 

Awesome video!!

 

I almost changed the oil! Might have been the 3rd or 4th time I have opened the hood since I bought it…in December of ‘21. Wow lots of metal under there but I think I found the filter. Learned the new one comes with o rings! Yea. Then I learned it wants 6qts!!!! I only bought the 5 jug. Glad I never pulled the plug… TBC

 

Get a Motivx adapter ... grips the filter housing at the strongest point: https://www.motivxtools.com

The o-ring on the side of the housing is what you need to watch for. The ring must fit into the groove on the side ... putting a coat of oil on the side where the o-ring brushes against the side when screwed in help to prevent the ring pulling out ... that is the greatest risk of causing a leak after install.

Fumoto valve replaces a simple plug ... hot oil will flow out like a bitch when a bolt is removed, but the Fumoto allows controlled release of the oil and attaching a tube to redirect the oil out-flow: https://www.fumotousa.com/cars-pickups-toyota-2022-tacoma-3-5l-v6

 

Looks great..

 

congrats!!

 

Custom molle side window rack/fold out shelf (paint is drying- will post shelf down later).

 

I got a shake in the steering wheel when on highway and tap or apply full brakes. Since my tires are less than 5k old, I'm going to get my rotors turned see if that eliminates shake. What do you guys reccomend, turning, or new rotors, at 69539 miles on truck?