1st gen ext cab frame diagram

Does anyone have a frame diagram with all the measurements for an ext cab Tacoma? Something like below but ext cab in high res.


It's not in the fsm I have.

 

@Empty_Lord You're resourceful, maybe you do?

 

Also are the ext cab and reg cab frames the same from the body mount back? that's all I really need.

 

Found this a while back

 

I saw that but didn't know if anyone had a higher res version of that handy.

 

I never found one but it was readable so I stopped looking

 

Closer!!

 

That’s the best document you can get from Toyota right there.

 

Awesome thanks!

 

Here is a PDF of a 2004 4WD extra cab frame.

 

Does the 99 short bed match up to a 97 regular cab short bed?

 

Did anyone else notice that the first diagram here has a typo?!?! I was totally stumped at first, but the 3 Dimensional diagram shows a different distance for the mm and inches, for the two mounting bolt holes for the rear springs (Upper front sprint mount bolt to upper rear shackle bolt). It lists 1,252mm and then below (42.29) for the inches. The thing is, 1,252mm is actually 49.29 inches, NOT 42.29 inches...

I just wanted to post this as it may have screwed someone else up.

I'm trying to confirm that whomever did the frame repair on my truck before I got it screwed up their calculations and remounted the front spring mount in the wrong place...

 

Slander, do you know what year this diagram is for? It changed in Sept 2000 as far as I can tell. A 2002 frame diagram shows me spring mounts that are 100mm further apart than the 1999 diagram shows. This one also has that dimension (1235mm instead of 1335mm). I'm just trying to find the true answer to my problems.