Help identifying what this is on frame

Hello, was wondering if anyone knows what this little plastic tab clip thing attached to my frame next to the body mount is. One side was very loose and clicked around at every bump, the other side is tight. thought it was my suspension but I am pretty sure it was this piece of plastic. Broke it off and so far no more clicking noise! Anyway thanks in advance.

 

If there is a hole under it, it is intended to prevent water intrusion into the frame while allowing water to leave the frame.

If you could hear it clicking, you must have reality good ears.

 

Gotcha, thank you. And yes every time I would have the window down I can hear clicking/ticking thought it was my sway bar links hitting my coil spring or something but I think this was the culprit

 

My Tacoma also has those. They were held in loosely. But the anti-rust glurp I applied has caused them to stop being clicky.

 

Its just a plug, they are broken on 50% of the tacomas I see. Don't fret it.

 

It’s called a hole plug to keep water out of the frame if you want to replace it here is the part number.

Part No.: 90950-01A24
PLUG, HOLE
Replaced by: 90950-A1020

 

That piece of plastic is single handedly holding your entire truck together, without it your truck will fall into a million pieces.

 

Forget about it, but if you can't stop worrying:

drown the area in Corrosion-X to make you feel about protecting your frame

 

I think these also happen to mark the spot Toyota says to jack from don't they? Might explain why they are always broken.

 

You know what that means, OP: part it out

 

Makes sense prob how mine broke haha

 

Perfect thank you