Redlantern’s Procharged 2019 AOI-TRDPro - VDB

Brah… I can’t wait to see it around the neighborhood!!!

 

@RedLantern I understand you have your base tune? When do you plan to install the kit? Please post pictures and take us with you for the adventure.

 

Yea I got the tune. Unfortunately I have some things that’s taking precedence at the moment so won’t be able to start til sometime next month. I will try to document as much as I can.

 

What size Widowmaker did you use? And do you still have the stock headers? That is a ridiculously awesome sound from a Tacoma.

 

Thank you! I recently put the Twin Turbo install on hold. About 1/4 the way into the install I noticed it would take longer than one weekend to do and had reverted everything back to what it was prior to installing the TT kit.

Because of this, I had purchased some catted dump tubes(headers) and now have that installed with my current exhaust setup. It’s a bit louder and tone has changed. I’ll try to get a decent video up.

 

Not much updates other than finally getting some gears done! Went with Revolution Gears 5.29s. Such a difference!

 

So I did a thing…

 

Ohhhhhhhh giggity!

 

Just started my install today on my truck. Prior to install I did a quick overview on the parts by bag and all the labeled bags were there. But during the install as I got up to the point of mounting the bracket /blower to the motor, I noticed I was missing a 3/8 x2 1/2” bolt that went into the sub bracket to help support the main bracket. I swear I checked like 10 times for that bolt but it was no where to be found as I’d open each bag systematically according to the instructions and laid out on a table and magnetic pan so I know I wasn’t going crazy. So Took the sub-bracket off and went to auto parts store and nothing fit as the pitch was different. So my solution was to buy a tap and retapped the sun-bracket to the proper pitch bolt that they had in stock. Took my time and worked like a charm to fixed my issue. Wasted 2 hours over that hiccup and should have been done with the install. Got as far as the plumbing done. Just need to wrap up intake side, battery relocation, fuel pump booster, and spark plugs.

 

Woot woot! That looks good in there! Hurry up and take it for a rip!

 

First Start up…

https://youtu.be/WIbGxrsqWos

 

Nice

 

It sounds ready to go full steam ahead!

 

Here's a nice little pull. Custom Tuning done by Overland Tailor Tuning - OTT, Thank you @Boltripper & @JustDSM for getting it dialed in!

https://youtu.be/8uNCKtBjLqs

 

Got a 0-60 run in

https://youtu.be/Kqjr0XCgviQ

 

Any pics of your surge valve placement or close ups straight down above the procharger?

 

forgot about this this dragy clip I had done. recorded 0-60mph at 6.7 secs.

https://www.instagram.com/reel/C_HxsH_xeR_/?igsh=MzRlODBiNWFlZA==

 

let me take a look. need to find it

 

Awesome thank you!

 

here you go. Sent it to your IG also.